Sino Galvo Low price SG7110 galvo scanner in pocket size for laser marking device
SG7110 type galvanometer has good running stability, high positioning accuracy, fast marking speed and strong anti-interference ability. The specific characteristics are as follows:
■ Adopt photoelectric sensor imported from the United States.
■ Differential photoelectric sensor accurately detects the position of the motor rotor, with good linearity, small drift, high resolution and repeated positioning accuracy.
■ Precise load design for 10mm lens, high motor assembly precision, reasonable structure, small static friction coefficient and zero offset, to ensure good dynamic characteristics of the system.
■ The driver has the function of position and speed advance detection, which greatly improves the dynamic response performance and scanning speed of the whole system.
■ Designed with overload, overcurrent and reverse polarity protection, making the system more reliable.
■ The whole system adopts electromagnetic compatibility optimization design, with high signal-to-noise ratio and strong anti-interference ability.
■ Solve common problems such as galvanometer motor temperature drift, signal interference and zero drift.
Technical Parameters：
Speed |
Marking Speed(1) | 5000mm/s |
Writing Speed(2) | 450cps |
Step Response Time(1% of full scale) | 350us |
Step Response Time(10% of full scale) | 750us |
Tracking Error Time | ≤164us |
Precision and Error |
Linearity | 99.9% |
Repeatability (RMS) | ＜8μRad |
Gain Error | ＜5mRad |
Zero Offset | ＜5mRad |
Long-term Drift Over 8 Hours | ＜0.5mRad |
Scale Drift | ＜40PPM/℃ |
Zero Drift | ＜15μRad/℃ |
Wavelength(3) | 10600nm / 1064nm / 355nm |
Power and Signal |
Input Voltage | ±15VDC |
Rated Current | 2A |
Interface Signal | Digital | XY2-100 |
Analog | ±5V |
Machinery Scan Angle(4) | ±11° |
Working Current, Temperature, Dimension |
Working Temperature | 0℃--45℃ |
Storage Temperature | -10℃--60℃ |
Aperture | 10mm |
Galvanometer Scanner Dimension (LxWxH) | 118.5x96.5x93.6mm |
Galvanometer Scanner Weight | ≈1.65Kg |
Product Description
Product Description
Remarks: The above parameters are obtained from the test after 30min of heating
(1) Use F-Theta lens, focal length 160mm, mark 2mm high single-line characters;
(2) Using F-Theta lens, the focal length is 160mm, and the number of single-line characters of 1mm height is marked per second;
(3) Special wavelength coating can be customized;
(4) The standard mechanical scanning angle is ±11°, and the Max mechanical scanning angle is ±15°, which can be customized if there are special requirements.
